Established as the world leader the AVDI for BMW often surpassed other aftermarket and even the OEM tools in Diagnostics, Module replacement, Key programming, Coding and Programming. Completely online with a great, easy to use interface.
DIAGNOSTICS
The following applies to the BMW/ Mini E, F and G series vehicles including Rolls Royce models.
- Reading Diagnostic Trouble Codes (DTC).
- Clearing Diagnostic Trouble Codes (DTC).
- Full guide through the DTC with possible scenarios and complete descriptions.
- Monitoring Live Values from all electronic modules installed in BMW and Mini vehicles.
- Live data monitoring from multiple modules at the same time with multiple actuator activation.
- Actuator testing for thousands of actuators from all electronic modules.
- Simultaneous operation of actuator tests while monitoring live data.
- Recording values of the vehicle while performing testing for analysis.
- Guided functions.
- Graph and table displays.
- Outstanding graphic user interface.
CODING/ PROGRAMMING
All Coding/ flashing/ Programming can be performed in accordance to the vehicle’s Integration Level (I-LEVEL). You can also choose to disregard it. -Default coding writing to electronic modules. Allows you to set the coding without the need of a coding file. We generate our own coding files.
. Coding files are saved in a format accessible to most tools for BMW, such as ISTA P and E-SYS.
. Full coding ability for E and F series vehicles allowing retrofits of options such as cameras, seat heating, modifications and thousands of others.
. Vehicle personalization according to each customer’s specifications and requirements. Speed limiter removals, video in motion
. Vehicle order (VO) reading, saving, modifications and writing.
. Retrofits
FAST CODING options. Hundreds of fast coding options which can be turned on or off with a single click:
. Replacement of the DME/ DDE module for E and F series (With or without CAS module encryption)
. Replacement of the ZF6HP (not applicable for F series vehicles) and ZF8HP EGS gearbox modules for E and F series (for 8HP in E series you need the donor car’s DME/ DDE or dump from it while for F series you do not need it).
. Replacement of FEM/ BDC modules in F series completely while retaining the original coding of the vehicle.
. Making FEM/ BDC modules virgin in order for them to be replaced.
. FEM mileage reset for seamless adaptation. Reset shadow memory.
. Change ID (VIN) available for many modules including FEM and DME/ DDE.
. Replacement of secondary electronic modules (not directly related to the vehicle’s operation) such as:
- FRM
- A/C
- Others
. Xdrive all wheel drive module replacement of the transfer case.
- FSC coding for navigational system updates for CCC/ CIC/ NBT navigation system
KEY PROGRAMMING
- . CAS4, CAS4+ Completely by OBD even if all keys are lost
. Key and remote programming for Car Access System (CAS)/ FEM/ BDC types of cars (performed for Keyless and non- Keyless keys, new or used).
. Individual Serial Number (ISN) reading from the DME/ DDE modules and CAS1/ 2/ 3/ 3+ (reading/ and encryption is also available for CAS modules).
. Boot mode reading of DME/ DDE with comprehensive wiring diagrams.
. Boot mode ISN visualization
. Reset working hours via boot mode.
. CAS- ELV; CAS- DME synchronizations.
. CAS1/ CAS2/ CAS3/ CAS3+ completely by OBD for adding a key or programming all keys lost. Reflashing the CAS3+ module might be required but thanks to our flash database this is an easy task.
. CAS4 cars by dump from the CAS module or completely by OBD for F series.
. FEM/ BDC key programming for additional keys and all keys lost (F series). Up to 2018.
. We can use:
- Original NEW E and F series keys
- Original E and F series keys (they can easily be renewed using the ABPROG software and programming).
. Aftermarket keys of good quality.
. BMW Bikes key programming for DST 80 and Hitag 2 models up to EWS4 by dump.
BMW MOTORCYCLES (BMW MOTORRAD):
Complete OEM and higher level of diagnostics:
- Reading and clearing DTCs with the ability to show causes and possible fixes.
- Full DTC details with descriptions.
- Actuator testing and activation.
- Live values in table or graph mode.
- Simultaneous use of Actuators and live value monitoring
- Key programming for BMW Motorcycles and scooters using HITAG 2, DST 80 and DST AES keys for example: S1000RR; BMW K19 - C600 and C650; BMW GS1200/ GS1200R; K and F series (K1300 and F800) commonly known as XEWS4 type. They use DST80 transponders so you can use the Abrites TA17 as a key.BMW R1200GS using a handsfree unit (Keyless go system) X_SLZ/ HUF. These use a DST AES type of key and others.
- Module replacement for BMW Motorcycles and scooters.
EWS replacement.
ABS replacement.
Cluster replacement.
DME replacement.
- Coding and Programming for BMW Motorcycles and scooters.
Vehicle order (VO).
Programming of flashes in the modules.
Integration level.
Customisation for various modules according to the customer's requests.
ADDITIONAL FEATURES
Online based software allowing continuous integration of updates directly with the help of an automated update process.
J2534 Passthru Support for ISTA- D, NCS Expert, Tool 32
