Commander for PSA
The AVDI for Peugeot/ Citroën is a very competent diagnostic software which is used together with the AVDI In order to perform vehicle diagnostics as well as advanced diagnostics on Peugeot and Citroën vehicles. Some of the main characteristics of the AVDI Software for PSA include the following within the basic diagnostic package.
Standard diagnostic features
The AVDI for Peugeot/ Citroën (PSA) is one of the most progressive and forward placed aftermarket diagnostic solutions to diagnosing Peugeot/ Citroën (PSA) vehicles in the world. With its help, you will be able to perform reading and clearing of Diagnostic Trouble Codes (DTC), acquire full details of when and under what circumstances they occurred and remove them after the problem which caused them has been resolved. Using the Abrites Diagnostics for Peugeot/ Citroën (PSA) you can view live values from all electronic modules and sensors using a graph and table types of monitoring and activate and deactivate various actuators on demand in order to properly determine the cause of each fault. The Abrites Diagnostics for Peugeot/ Citroën (PSA) covers All CAN and UDS Peugeot/ Citroën (PSA) vehicles as well as many K-line vehicles, however, the focus of the software always was and will be the latest vehicles produced by the French manufacturer. The Abrites Diagnostics for Peugeot/ Citroën (PSA) is designed to provide an OEM and a higher level of diagnostics at a fraction of the cost. You will need a basic AVDI set and Annual Maintenance subscription in order to use the AVDI for Peugeot/ Citroën (PSA). With the help of the software, you can also reset the service intervals of these vehicles in order to be able to perform maintenance of Peugeot/ Citroën (PSA) vehicles.
- Standard diagnostic functions over three separate protocols - K-line, CAN and UDS
- Reading and clearing of diagnostic trouble codes (DTCs)
- Module identification and almost instant information
- Actual values on demand
- Graphic Details
In terms of the so-called "Advanced diagnostics", the AVDI software for PSA provides an almost unlimited functionality where almost every modern vehicle produced by Peugeot/Citroën are supported.
The reading and writing of EEPROM is supported for the engine control units in order to have a backup to repair the car in case of any issues.
Features and highlights:
ALL OF THE BELOW ARE PERFORMED COMPLETELY BY THE ON BOARD DIAGNOSTICS CONNECTOR (OBDII):
- PIN Code Reading and key programming - the software is designed in such a way so that it can be as user-friendly as possible for easy and quick work for all our locksmith customers
- Mileage reading and calibration for a vast variety of models for all relevant modules, which also includes disabling of cluster synchronization as well as the ability to work with all the latest models by directly updating the EEPROM
- Reading and modifying mileage in the dashboard of newer models that without the need of disabling the synchronization
- BSI Exchange - for all CAN and UDS protocol vehicles. The Peugeot/Citroën Built-in System Interface is a control module, essential to the vehicles. It controls a large amount of the vehicle's operation. Given its many tasks this module is very susceptible to failure. Given the cost of a new module and the main dealer prices for an exchange of a failed BSI, the "BSI exchange" special function provides a cost effective way out for the customer, allowing a repair shop to adapt a second hand BSI in just a few mouse clicks
- Instrument cluster Read/Update Conf data
- BSI Read/Update Conf data
- Instrument cluster exchange - A broken instrument cluster is an extremely hard task to undertake by any repair shop. We know that and have tried to turn it into an easy task for people who are willing to perform it (please contact the support team for supported models)
- Reading EEPROM and FLASH from the ECUs
- Changing the PIN code of the BSI
- Visualization and fault log clearing for BSI modules
- Matching virgin Engine Control Units to BSI modules
- Visualization of the error history from the Engine control units
- Clearing of the error history for some models
- Service Zero Reset (a.k.a Oil reset) for all CAN protocol supporting models - an essential part of any service workshop performing maintenance, general servicing or rebuilds
- Airbag crash data management - allows the user to clear the crash data after repairing the vehicle thus restoring the normal operation of the car after an accident - an excellent solution for any accident damage repair shop.
Special Functions
Apart from basic diagnostic functions, the Abrites Diagnostcs from PSA contains extremely strong functionality in terms of special functions. Its main advantages, compared to the other products on the market are the support for 2015+ vehicles equipped with Continental BSIs both for PIN Extraction, odometer calibration and EEPROM reading and writing and the BSI Exchange special function permitting users to adapt a second-hand BSI to the vehicle. Complete description of the separate special functions can be seen below: